mil-c-24308 d-subminiature www.glenair.com e-mail: sales@glenair.com glenair, inc. ? 1211 air way ? glendale, ca 91201-2497 ? 818-247-6000 ? fax 818-500-9912 ? 2004 glenair, inc. printed in u.s.a. a-84 cage code 06324 .44 (11.2) f 1.50 (38.1) b c d a #4-40 unc thread (2 places) e connector retaining spring rfi/emi gasket optional .045 (1.1) ty p. j h g 557-196 d-subminiature solid banding backshell with elliptical entry 557 t 196 m 2 r1 b 1- 04 b b = band supplied (600-052), omit for none dash no. (table iii) 0 = without emi gasket, 1 = with emi gasket jackscrew type (page a-4) receptacle mounting (table ii) f0 = front mounting r1-r7 = rear mounting product series cable entry style t = top basic part number finish symbol (page 3) shell size (table i)
mil-c-24308 d-subminiature www.glenair.com e-mail: sales@glenair.com glenair, inc. ? 1211 air way ? glendale, ca 91201-2497 ? 818-247-6000 ? fax 818-500-9912 ? 2004 glenair, inc. printed in u.s.a. a-85 cage code 06324 1. metric dimensions (mm) are indicated in parentheses. 2. do not use connectors with float mountings. 3. for front mount, mating connector must be mounted to panel using m24308/26 female screwlocks. for rear mount, use glenair gk134. 557-196 d-subminiature solid banding backshell with elliptical entry shell size 1 2 3 4 5 6 table i: shell size & connector interface dimensions max dash no. table iii 03 05 08 12 13 14 a max 1.393 (35.4) 1.706 (43.3) 2.265 (57.5) 2.900 (73.7) 2.800 (71.1) 2.900 (73.7) b max .624 (15.8) .624 (15.8) .624 (15.8) .624 (15.8) .750 (19.1) .844 (21.4) c ref. .312 (7.9) .312 (7.9) .312 (7.9) .312 (7.9) .375 (9.5) .422 (10.7) d .005 (.1) .984 (25.0) 1.312 (33.3) 1.852 (47.0) 2.500 (63.5) 2.406 (61.1) 2.500 (63.5) com?l shell size ref e/09 a/15 b/25 c/37 d/50 f/104 dash no. r1 r2 r3 r4 r5 r6 r7 f0 table ii: receptacle mounting panel thickness .031 (.8) .047 (1.2) .062 (1.6) .093 (2.4) .104 (2.6) .125 (3.2) .156 (4.0) n/a e .247 (6.3) .231 (5.9) .216 (5.5) .185 (4.7) .174 (4.4) .153 (3.9) .125 (3.2) .305 (7.7) dash no. 01 02 03 04 05 06 07 08 09 10 11 12 13 14 table iii: cable entry g .375 (9.5) .375 (9.5) .438 (11.1) .438 (11.1) .438 (11.1) .438 (11.1) .438 (11.1) .500 (12.7) .500 (12.7) .500 (12.7) .562 (14.3) .562 (14.3) .675 (17.1) .740 (18.8) h 250 (6.4) .375 (9.5) .500 (12.7) .625 (15.9) .750 (19.1) .875 (22.2) 1.000 (25.4) 1.125 (28.6) 1.250 (31.8) 1.375 (34.9) 1.452 (36.9) 2.100 (53.3) 2.000 (50.8) 2.000 (50.8) j .375 (9.5) .500 (12.7) .625 (15.9) .750 (19.1) .875 (22.2) 1.000 (25.4) 1.125 (28.6) 1.250 (31.8) 1.375 (34.9) 1.500 (38.1) 1.577 (40.1) 2.225 (56.4) 2.125 (54.0) 2.425 (61.6) f .250 (6.4) .250 (6.4) .312 (7.9) .312 (7.9) .312 (7.9) .312 (7.9) .312 (7.9) .375 (9.5) .375 (9.5) .375 (9.5) .437 (11.1) .437 (11.1) .550 (14.0) .615 (15.6)
|